Installing Heads and Meassuring Pushrod Length

Friday, 16. July 2010

My newly washed aluminum MoTown heads with new and stiffer springs are now back on the block. They were installed today so I could measure the length of the pushrods required for my new solid roller cam.

Installing Heads

If you need to find out the length of the pushrods required for your valvetrain, Geometry Lesson by Jeff Smith on carcraft.com is a good article to read.

If you need the torque specs when you are bolting your US-engine together, you can find them among other things at boxwrench.net.

Advertisements