Solgt!

Saturday, 3. May 2014

Til Salg! – Pris kr. 172.000,-

Kontakt mig via mail: camaro@simonholm.com eller på mobil: 31 12 24 11.

1967 Camaro SS nysynet (8 år til syn) og med masser af performance udstyr, solid og kraftig motor samt forstærket 4-gears automatgearkasse. Bilen kører rigtigt godt og ligger godt på vejen. Jeg har haft bilen i 13 år og har gennem tiden fået lavet rigtigt meget ved den

Jeg sælger den, fordi jeg har indset, at jeg ikke længere har den tid og det overskud, der skal til. Lakken er slidt, og der skal laves rust (pladedele medfølger) – se https://simondy.wordpress.com/2013/08/11/rust-der-skal-laves/.

10_IMG_3367

(Se flere billeder længere nede)

BILEN: Oprindeligt er bilen en ægte Camaro SS-350 som blev indregistreret i Danmark for første gang i marts 1967, speedometeret viser således km/h.

MOTOR: World Products V8 small-block fra 2004 med alu topstykker samt 1.6:1 rullevippere og -knast. Modificeret 4150 Holley carburetor med K&N luftfilter. MSD Strømfordeler med MSD Digital-6 Plus tændningsboks. Be Cool aluminium køler med elektrisk blæser.

UDSTØDNING: Hooker Super Competition 1 3/4″ headers og Flowermaster 2 1/2″ udstødning. (Et 3″ udstødningssystem fra MagnaFlow sælges også)

TRANSMISSION: Forstærket 4-gears TH200-4R automatgearkasse med 2600-2800 stallspeed converter (heavy duty), begge dele købt fra California Performance.

BAGTØJ: GM 12-boltet med stock 3.07:1 gear og Richmond Powertrax No-Slip locker.

RAMME: Stock med subframe connectors og traction bars. Rammen er boltet på med polyurethane bøsninger.

UNDERVOGN: Hotchkis Performance fjedre for og bag med KYB støddæmpere samt Hotchkis sway bars for og bag. Global West bærearme foroven.

STYRTØJ: Detroit Speed & Engeneering 600 servo med en udveksling på 12.7:1.

BREMSER: Bremseforstærker med CPP ventileret skivebremser foran og stock tromlebremser bagved.

HJUL & DÆK: Center Line Warrior 15×8″ baghjul i alu med 275/50R15 dæk og 15×7″ forhjul med 225/50R15 dæk. Et sæt Rallyhjul i stål følger også med.

EKSTERIØR: Yenko “Stinger” motorhjelm i glasfiber (jeg har SS-hjelmen, hvis du hellere vil have den), bagklap med spoiler i glasfiber, front inderskærme i glasfiber samt plastik frontspoiler. LED baglygter.

INTERIØR: Flot originalt deluxe interiør i rødt med Procar forsæder (originale sæder haves), Billet Specialties Chicayne rat (original rat haves), 4 hofteseler og 1 Sparco 3-point racer-sele (som nemt kan gemmes væk), B&M Megashifter, Autometer & Stewart Warner ure, JVC stereo, skumslukker i krom. Med alarm og startspærre.

TIDER: 0-100 KM/T: 4.5 sek. og 1/8 MILE: 8.2 sek. @ 146.4 km/t (målt i 2007 på upreppede bane).

Billeder:

20_IMG_3435
30_IMG_3415
40_IMG_3429

Motor:

50_IMG_3384

Bagagerum:

60_IMG_3404

Interiør:

70_Int1_IMG_3450
80_Int4_IMG_3442
90_Int5_IMG_3443

Kontakt mig via mail: camaro@simonholm.com eller på mobil: 31 12 24 11.

Advertisements

Rust Der Skal Laves

Sunday, 11. August 2013

Bagskærmkanter, bunden af dørene, tagrander og hvad lakken ellers måtte gemme på.

Rust billeder:

10_IMG_3376
20_IMG_3373
30_IMG_3375
40_IMG_3378
50_IMG_3381

Pladedele:

60_IMG_3992
70_IMG_3996
80_IMG_3999

Painting the Drum Brakes for the Second Time

Monday, 1. February 2010

The first time I painted the drums I did not know what I was doing so it is actually a surprise that they have lasted this long.

Drum Brake - Sand Blasted / Zinc Primed
Drum Brake - Sand Blasted and Grinded
Both drums had been sand blasted some time ago, the one on the left is what they looked like before I started working on them. The drum on the right has had zinc primer applied. Before zinc primer was applied I grinded the drums to get off all the surface rust then cleaned them with cellulose thinner.
Drum Brake - Painted Black
Mounted Drum
When the primer was dry enough to apply paint, the drums were painted with enamel flat black paint. Mounted drum brake with wheel spacer.

New Parts Arrived Today

Friday, 4. September 2009

New parts from summitracing.com and up22.com arrived today. From Summit came my new camshaft, which I have carefully selected with tech support from Summit and Comp Cams. It came along with a lot of other very nice parts as you can see in the picture. I am of course looking forward to have all the goodies installed and find out how my new valve train performs. But it will be a while before I get that far, I have some rust issues and other things to deal with first.

New Parts - Camshaft, etc.

From up22.com came my fiber glass trunk lid with spoiler, rear bumper and two front inner fenders. I wish I had googled up22.com before I ordered, in my opinion their products are not of high quality. I have checked the trunk lid and it needs a lot of work and trimming before it can be fitted. I should have ordered from vfnfiberglass.com or glasstek.com instead.


Engine Rebuild – part 1

Thursday, 16. July 2009

Friday evening Michael pulled the engine so it was ready for me to work on. I started to take it apart Saturday morning and everything went fine. It quickly became evident that the cam shaft and lifters needed to be replaced. Both the intake and exhaust lobes on the cam had been worn quite heavily on cylinder number six.

Taking Out the Engine
Stripping the Engine
Yanking the engine. Stripping the engine.
Engine Parts All Over the Floor
Bottom of Engine
Engine parts all over the floor. The bottom of the engine is looking good.

 

This week I spent cleaning the engine, painting it and checking it for wear and tear. Mechanically, everything seems to be fine and I only need to change the cam and lifters. That is until I decided to get a solid (mechanical) roller cam instead of a hydraulic flat tappet.

Some of the things I did this week:

Intake Manifold Needs to Be "Ported"
Intake Manifold "Ported"
As you can see in the first picture the intake manifold has some leftover aluminum from the casting and it should be grinded. The leftover aluminum is removed in the second picture and it was quite easy to remove.
Valve Covers Painted
Engine Block Ready for Paint
The valve covers have been painted. The engine block is ready for paint.
Engine Block Painted
Engine Block Painted
The engine block has just been painted and it now has the color I wanted it to have from the beginning.
Intake Manifold Ready for Paint
Intake Manifold Painted
The intake manifold is cleaned and ready for paint. Freshly painted intake manifold.

See all the pictures.


Bigger Wheels

Tuesday, 19. May 2009

I have decided that my Camaro needs bigger wheels. In my opinion 17″ front and 18″ rear look better than 15″ and they will also suit my project. A kind of street Trans Am racer with a modern look, is perhaps what describes my project best.

American Racing Torq-Thrust II Vintage Wheel Works V48

American Racing Torq Thrust II

Vintage Wheel Works V48

When I got my 15″ Centerline Warrior wheels I was also looking at the American Racing Torq Thrust II wheels. Now I am looking at them again but everybody has these it seems and I want something a bit different. If I was building a “traditional” Trans Am racer I would go with the Minilite copies, V48 from Vintage Wheel Works with the center painted black. I was also looking at the AR Torq Thrust M with the black center, but then I found these:

Foose Legend Gray

The Foose Nitrous Legend Gray

They look like the TT-IIs only better, in my opinion. They will also fit the future paint scheme on my Camaro and they come in the sizes I need. Looking like that  they are perfect for the Dark Horse.

Now I need to figure out which tires I should get..


Installing Red Procar Seats

Sunday, 1. March 2009

Installing these seats is quite straight forward. But if you like me have installed an eye bolt for your race harness you may run into a little trouble. Luckily I was able to solve the problem by just removing a washer.

Procar Seat in My Camaro

At first I could not Install the seat in the driverside. A bolt on the seat was interfering with the race harness’ eye bolt. But removing a washer under the bolt on the seat made just enough room for me to install the seat.

Procar Seat in My Camaro

The Procar Elite 1100 seats are done by Scat.